chemical adhesive manufacturer

 

Two-component polyurethane adhesive formachine component proportion ratio is100:25
	Material-A	Material-B
Weight	Small barrel :25KG	6.25KG
	Big barrel :50KG	12.5KG
Physical nature	orange-red viscous liquid (color based on your request toconfigure)	brown-yellow liquid
viscosity	800-1000MPa.S(25°C)	25-50MPa.S(25°C)
density	1.02g/ml	1.02g/ml
package	Plastic bucket or Tin bucket	Plastic bucket ,Tin bucket, Plastic pots
storage	1. Material-A and material-B can store up 3-6 months.
	2. To appropriate indoor storage above 15°C

Usage:

1.The material must be full rocked after each to theplastic injection machine plastic injection so that the A materialmixing evenly.

1.Everytime the plastic injection machine plasticinjection A material must be full before the shaking in order tothe   material until

2.AB material proportioning ratio of A:B=100:25 or4:1.28°C,you can start operation

3.Material temperature controlled24°C-28°C appropriate then you can startoperation.

4. Must be clean before using the mould release agent(Note:

The new plastic mould can be wiped free)

5 .If A and B is not reaction please measuring A and Bratio.

6. A and B must be sealed to .To avoid the air and watervapor reaction, as a result affecting the effect ofcolloidal

HTTP:Anping sanlian filtering equipmentCo.,LTD

Http:china-super-glue.com 

Address:  Hebei Province AnpingCounty, Hengshui City,Hebei Filter City Welcometo the information obtained from the sample to facilitate you yotest the adhesive properties,to make the right purchasing decisionsto save money

 

chemical adhesive manufacturer

chemical adhesive manufacturer